The following chart presents a comparison between basic parameters of the new Sigma model, its reflex camera predecessor, and other 1.4/50 devices, designed for mirrorless systems.
The new Sigma sticks out with the most complex optical system. What's important, despite a high number of elements, the producers managed to keep in check both weight and physical dimensions because the new model is noticeably lighter than its predecessor, and also the Panasonic and Sony lenses.
In the photo above the Sigma A 50 mm f/1.4 DG DN is positioned between the Sigma A 35 mm f/1.4 DG HSM, designed for reflex cameras, and the classic double gauss lens so the Canon EF 50 mm f/1.4 USM.
Please Support Us
If you enjoy our reviews and articles, and you want us to continue our work please, support our website by donating through PayPal. The funds are going to be used for paying our editorial team, renting servers, and equipping our testing studio; only that way we will be able to continue providing you interesting content for free.
The new Sigma lens starts with a metal mount that surrounds contacts and an immobile rear element, 28 mm in diameter. The element is hidden less than 1 cm deep inside a well-blackened inner tube, and is surrounded by a 29x23 mm frame.
A black ring made of metal that increases its diameter very quickly is the first part of the proper barrel. The ring features a white dot, making an alignment with a camera easier, and the model year of the instrument, in this case 023, information that the lens was made in Japan, and an inscription with the minimum focusing distance :”0.45M/1.45FEET– ∞”.
Further on you see an aperture ring, 12 mm wide, mostly covered by ribbing; it features aperture marks ranging from f/16 to f/1.4 and an A value (meaning automatic settings). The ring moves every 1/3 EV stop but you can also make it clickless. Its performance is very comfortable and smooth, simply beyond reproach.
Then you see an immobile part of the lens covered by plastics with the logotype of the company, the name and parameters of the lens, its serial number, some fine ribbing, an 'A' letter that means the instrument is qualitifed as an Art line lens, and a whole array of switches. The first of them – AF/MF FOCUS– allows you to control the focusing mechanism working mode. The second one –AFL– recalls a specific autofocus position but you can allot it other functions too. Below you see a CLICK OFF/ON switch that controls the aperture ring mode. On the other side you can also find the aperture ring lock switch that can be set either on the A position or at any other point ranging from f/1.4 to f/16.
A manual focus ring, as wide as 49 mm and mostly covered by ribbing, is another part of the barrel of the lens. It is a focus-by-wire mechanism; you won't find any distance or DOF scale on it. Its performance we found very smooth and the ring remains properly damped at the same time. Its focus throw depends on the speed of your turning. When you move the ring faster it amounts to approximately 200 degrees, when you turn it slower you can reach even over 400 degrees. Both these are values allow you very precise settings.
The barrel ends with a short, immobile ring that turns into a hood mount (a hood is added in the box with the lens). The front element is 54 mm in diameter, slightly convex, immobile, and surrounded by a non-rotated filter thread, 72 mm in diameter.
The lens is weather sealed – splash proof, and dust proof. The front element is also protected against dirt, grease, and moisture retention by hydrophobic coating.
When it comes to optical construction the lens features 14 elements positioned in 11 optical groups. Among them you can find one SLD glass element, and as many as three aspherical elements. Inside there's also a round aperture with 11 blades that can be closed down to a value of f/16.
Buyers get in the box with the lens: two caps, a petal-type hood, and a solid, practical case with a strap.