LensTip.com

Lens review

Sigma A 35 mm f/1.2 DG DN

Sigma A 35 mm f/1.2 DG DN
11 September 2019
Arkadiusz Olech

1. Introduction

In a sense you can say Sigma has just made their thrid serious debut in the Sony mirrorless system. The first one was a series of three f/2.8 19, 30, and 60 mm focal lengths lenses designed for APS-C cameras, all of them shapely, very sharp, and cheap at the same time. If you decided to buy them you wouldn't regret your decision for sure.

The second time they modified their exelent Art line primes which, originally, were designed for reflex cameras. The modification consisted of adding an extension so the constructions could be attached directly to mirrorless Sony cameras, either with APS-C or full frame sensors.

Still all were waiting impatiently for true mirrorless Sigma lenses, instruments that were designed for mirrorless full frame cameras from the very beginning. That waiting time ended in July 2019 when three Sony FE and L (L-mount alliance) models were shown: the Sigma A 14–24 mm f/2.8 DG DN, the Sigma C 45 mm f/2.8 DG DN, and the Sigma A 35 mm f/1.2 DG DN.


Please Support Us

The coronavirus crisis has been adversely affecting many businesses and, sad but true, ours is not an exception. Despite that difficult situation we would like to preserve continuity and high quality of publications available on all our websites. Still, we are now aware it might be impossible without additional financial help. That's why we would like to ask all those who visit, read, and care about Optyczne.pl, LensTip.com i Allbinos.com for support - it's enough you send us a small sum of money via PayPal. If a lot people decide to support our websites we think we'll stand a chance and survive next months without any lasting harm. We count on your support and understanding, stay safe and be healthy.

- - - - - - - - - - - - - - - - - advertisement - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

The last of these lenses fell into our hands as the first and the following chapters present our impressions concerning its optical and mechanical properties – enjoy your reading!

We would like to thank the Sigma ProCentrum company for sending us very quickly the final specimen of the lens for testing.

You are also invited to get acquainted with our test procedure, described in the article "How do we test lenses?" If you feel it’s still not enough, please go to our FAQ section where you can find some further explanation.

Sigma A 35 mm f/1.2 DG DN - Introduction

Sigma A 35 mm f/1.2 DG DN - Introduction